Installation
Can contact adhesive be used in van and camper installations?
Jelinek Cork contact adhesive can be used in van and camper installations, as it is rated for temperatures up to 300°F (149°C). An important consideration for van and camper installations is that excessive vibration can weaken the bond.
How long should cork wall and floor tiles acclimatize before installation?
We recommend letting all cork products acclimatize for at least 72 hours before beginning installation. Skipping this step can cause negative results after installation, as the humidity of the cork tiles adjusts to the humidity and temperature in the ...
Should I use tape on my cork tiles during installation?
No, we do not recommend using tape when installing glue-down cork flooring. The tape may react with the finish on the tiles, and it is not necessary, as the contact adhesive forms an instant bond.
Can I use an adhesive other than contact adhesive (also known as contact cement) to install cork flooring or wall tiles?
For glue-down cork flooring and wall tiles, we recommend using a contact adhesive. Most water-based, non-contact adhesives rely on water evaporation to form a bond. However, cork tiles tend to expand and curl at the edges during this process. As the ...
Does contact adhesive (cement) need to be completely dry before applying the tiles?
Yes, contact cement needs to be 100% dry on both the cork wall or flooring tiles and the surface the tiles will be applied to. It is recommended to apply a uniform, generous coat of adhesive to both surfaces using a nylon brush, a roller (texturing ...
Can you adhere cork rolls, sheets or wall tiles to concrete block?
Yes, you can adhere cork rolls, sheets, and wall tiles to concrete block with our approved water-based contact adhesive. Ensure the block wall is in good condition, with no signs of spalling, pitting, or flaking. You should apply two coats of contact ...
What should I do if the product I received does not adhere to the wall or surfaces properly?
If you are experiencing issues with a self-adhesive product not adhering properly to surfaces, please try the following. Ensure that the wall is clean of dust and debris prior to installation. Ensure the wall is dry prior to installation. Ensure you ...